by 
Anonymous
ANSWERS: 1
-
Here are the instructions. The normal lamp adjustment is to park the vehicle on level ground 25 feet away from a wall. Adjust the lights untill the bright spot is straight ahead and at the same level as the center of the lense. If people flash you, lower slightly. Two adjusting screws control the horizontal and vertical aiming of each headlamp assembly. The screws (1, 2) are in the radiator support. The location is not readily visible. The 2 holes in the radiator support for each headlamp assembly provide access to the recessed adjusting screws (1, 2). Using a T15 TORX(R) head bit, turn the screws. Adjust the headlamps to the specifications required by the state and/or the local authorities.
RELATED QUESTIONS
Copyright 2023, Wired Ivy, LLC