ANSWERS: 3
  • Do you have a bad connection at the amp?
  • Check that all connections at the amp are tight and also where the ground is connected make sure that you have paint scraped off and tightened.
  • the best ground for an amp is the seat bolt make sure you scrap the surface to get all rust and or paint off or else you will have a bad ground causing your amp to cut out also check your remote wire it could have been damaged during installation. if that dont work try turning your settings all the way down and un do everything then hook it all back up if it still dont work then something could be wrong with your amp if you have a spare try it and see if it works

Copyright 2023, Wired Ivy, LLC

Answerbag | Terms of Service | Privacy Policy