I have a lexmark x4270. When you try to print an alignment page the printer stops and says error 1201. What does this error mean?
by 
tbillc
ANSWERS: 2
-
this could be many things ,but the most common for that is bad file (if by computer)if it does it by manual trying then it is probably a hardware , device or moving wire strip problem
-
This is what I found: The definition corresponding to this error message is this: "The print carrier stopped before all of the data was used." To resolve this issue, please do the following: 1. Power the printer off. 2. Remove all cables from the back of the printer. 3. Reinsert the power cord. 4. Switch the printer back on. 5. Check the operator panel to see if the 1201 error message is displayed. 6. If the error message returns, the printer could be defective. Contact Lexmark Customer Support for further troubleshooting and warranty options.
RELATED QUESTIONS
Copyright 2023, Wired Ivy, LLC