xTooltipElement Service Information 2000 Chevrolet Blazer - 4WD | Blazer, Bravada, Envoy, Jimmy, S10 Pickup, Sonoma (VIN S/T) Service Manual | Body and Accessories | Doors | Repair Instructions | Document ID: 527458 ________________________________________ Front Side Door Window Regulator Replacement Tools Required J 34940 Rivet Gun Removal Procedure 1. Remove the window. Refer to Front Side Door Window Replacement . 2. Disconnect the power window motor electrical connector, if equipped. 3. Remove the electrical harness retainers, if equipped. 4. Drill out the rivets that secure the window regulator to the door. 5. Remove the window regulator from the door. 6. Remove the power window motor, if equipped. Refer to Power Window Motor Replacement . Installation Procedure 1. Install the power window motor, if equipped. Refer to Power Window Motor Replacement . 2. Install the window regulator to the door. 3. Install the rivets that secure the window regulator to the door using J 34940 . 4. Connect the electrical connector, if equipped. 5. Connect the electrical harness retainers, if equipped. 6. Install the window. Refer to Front Side Door Window Replacement . © 2008 General Motors Corporation. All rights reserved.