- NEW!
by barry on August 26th, 2009
my car was doing the same thing but its a 1990 chevy lumina my fuel pump was running then i checked the filter on the outlet side it was getting fuel there i put a fuel pressure gauge on it my book said with the switch on it should read 40psi it read 0 so i changed the fuel pressure regulator now it reads what is supposed to that still never fixed the problem then i ran a code it gave a 22 wicth is throttle position sensor i changed it that never fixed it i changed the ecm (computer) now it runs but still will not take full throttle get this i removed the plug wires one at a time to check for dead cylinder then it ran good for twenty mins on the road came home shut it off and it is not taking throttle again but it still runs good luck i hope this helps
by bubbafw on July 7th, 2007
try the inition switch on the stering coloumn
i have a 1987 craftsman gt6000 18.0 hp electric start, and the thing wont make a sound not even a click when i turn the key. got any ideas??
by William_T4098 on June 13th, 2011
| 1 person likes this
My buddy has a 94 buick sadan wth a 3.8 It has no spark,,, any ideas??
by Robert_B8777 on August 8th, 2011
| 1 person likes this
i have a 99 chevrolet suburban, i can crank it but it wont stay on. whats theproblem
by Brandee_L9432 on September 3rd, 2011
| 1 person likes this
'97 350 new crank,rod,main bearings,timing,gears,plugs,wires now has a runs good but has a burp like as misfire but not all the time.HELP
by weld on August 10th, 2011
| 1 person likes this
What sound does your engine make?
by Weylon on October 2nd, 2011
| 4 people like this
You're reading 97 chevy cavalier cranks but engine stalls after 2-5 sec. when engine stalls anti theft light blinks. fuel pump comes on like it should for 2 sec. when key is turned
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!
Comments