by 
PattyAnn
ANSWERS: 2
-
Usually you hook your PS2 up directly to your TV. You will want to hook it up to your VCR and then hook your VCR up to the TV. This way the PS2 signal has to go through the VCR. Refer to your VCR's manual for recording instructions.
-
All VCRs have RCA inputs located on them. Alot have one or two sets of inputs on the back and then one on the front. Simply connect the Playstation to the RCA jacks on the VCR and connect the VCR to the TV. It doesnt matter whether you use the coaxial cable or RCA jacks from the VCR to the TV. If you use the coaxial, then the TV will need to be on channel 3 or 4 to receive the signal. If you use the the RCA jacks you will need to be on the TV's auxillery input, which is typically going to channel 0. The VCR will also be on auxillery input as well. Again typically using channel 0 and then selecting which input set to use (front, back, back2, etc). Once you can see the game on the TV, put in a tape and hit record. Cheers! -SC
RELATED QUESTIONS
Copyright 2023, Wired Ivy, LLC