I have the same problem and my computer guys cant figure this out! I have a printer plugged into a back usb port and an infrared for the keyboard and mouse so it makes no sense to me that the remaining ports dont work. Im ready to ask the computer guys to for a new CPU.

To fix this problem, use the following methods in the order in which they are listed. After each method, check the USB device to see whether the problem is fixed. If the problem is not fixed, try the next method. This article also includes a workaround that you can try if these methods do not work. Back to the top Method 1: Use Device Manager to scan for hardware changes Use Device Manager to scan for hardware changes. After your computer scans for hardware changes, it might recognize the USB device that is connected to the USB port so that you can use the device. To scan for hardware changes, follow these steps: Click Start, and then click Run. Note If you are running Windows Vista, click Start, and then use the Start Search box. Type devmgmt.msc, and then click OK. Device Manager opens. In Device Manager, click your computer so that it is highlighted. Click Action, and then click Scan for hardware changes. Check the USB device to see whether it is working. If scanning for hardware changes fixed the problem, you are finished. If this method did not fix the problem, go to Method 2. Back to the top Method 2: Restart the computer If scanning for new hardware did not fix the problem, try restarting the computer. After the computer has restarted, check the USB device to see whether it is working. If restarting the computer fixed the problem, you are finished. If this method did not fix the problem, go to Method 3. Back to the top Method 3: Disable and re-enable the USB controller Use Device Manager to disable and re-enable all the USB controllers. This lets the controllers recover the USB port from its unresponsive condition. The USB controllers represent the USB ports in Device Manager. If you are not comfortable with advanced troubleshooting, try the steps in the "Workaround" section. To disable and re-enable the USB controllers, follow these steps: Click Start, and then click Run. Note If you are running Windows Vista, click Start, and then use the Start Search box. Type devmgmt.msc, and then click OK. Device Manager opens. Expand Universal Serial Bus controllers. Note You might have to scroll down the list to find this item. Right-click the first USB controller under Universal Serial Bus controllers, and then click Uninstall to remove it. Repeat step 4 for each USB controller that is listed under Universal Serial Bus controllers. Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled. Check the USB device to see whether it is working. If the USB port recognizes the device and if you can use the device, you are finished. If none of these methods worked for you, you can disable the Selective Suspend feature. However, be aware that when the Selective Suspend feature is disabled, all USB host controller drivers (and therefore all USB ports and connected USB devices) in the system are affected. Therefore, your computer cannot suspend any USB devices that are connected to it, and the USB devices can continue to use power while connected to the computer. Additionally, the Allow the computer to turn off this device to save power check box does not appear on the Power Management tab for the USB Root Hub.

MORE HERE.. This section is intended for an advanced computer user. You can disable the USB Selective Suspend feature as a workaround by editing the registry. The USB device may become unresponsive because of a race condition in the Selective Suspend feature. The Selective Suspend feature suspends the USB device to efficiently maintain battery power by enabling the computer to turn off the USB device. However, sometimes this feature may not correctly wake up the USB device. Therefore, the USB device is unresponsive when you try to use it. You might want to disable this feature for server products where power management is not important or required. Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows To disable the Selective Suspend feature, follow these steps: Click Start, and then click Run. Note If you are running Windows Vista, click Start, and then use the Start Search box. Type regedit, and then click OK. Registry Editor opens. Locate and then click the following registry subkey: HKEY_LOCAL_MACHINESystemCurrentControlSetServicesUSB If the DisableSelectiveSuspend registry entry is present, double-click it. If it is not present, create the entry. To create the entry, follow these steps: On the Edit menu, point to New, and then click DWORD. Type DisableSelectiveSuspend, and then press ENTER. On the Edit menu, click Modify. In the Value data field, type 1 to disable the Selective Suspend feature, and then click OK.Check whether the problem is fixed. If the problem is fixed, you are finished with this article. If the problem is not fixed, you can contact support (http://support.microsoft.com/contactus) .