by Anonymous on March 16th, 2009

Anonymous

Question

Help answer this question below.

How do I take off the slave line from the trans of a 1987 ford ranger. It has a hard plastic line that goes to an internal slave cylinder.

  • Like
  • Report

Answers. 2 helpful answers below.

  • by 68 Charger on March 25th, 2009

    68 Charger

    Clean off the area where it goes into the slave cylinder with brakleen or something similar, you will see a white sleeve made out of plastic, you need to push it in towards the slave cyl, there is a tool but you can use a medium size flat screwdriver, work your way around the white sleeve and it will slide in, when it goes in all the way, you should be able to pull the line out. Good luck.

    No comments. Post one | Permalink

  • by Gup on March 17th, 2009

    Gup

    if its the style i am thinking of it requires a special tool that should be available at your local part store. they should be able to help you find it and explain how to use the tool

    No comments. Post one | Permalink

Want to attach an image to your answer? Click here.

Did this answer your question? If not, then ask a new question or create a poll.

You're reading How do I take off the slave line from the trans of a 1987 ford ranger. It has a hard plastic line that goes to an internal slave cylinder.

Follow us on Facebook!

Related Ads

ANSWERBAG BUZZ

Do u need special tool to pull off slave cylinder
How to take the slave line out of a 91 ranger
2004 ford ranger slave cylinder line
1987 ford ranger internal slave cylinder
How to thank a good doctor