by Tmaq513 on February 18th, 2009

Question

Help answer this question below.

My 98 eclipse spyder 2.4l idle runs rough after engine has been running for a while had error codes read camshaft sensor and cylinder 1 misfiring change spark plugs and camshaft sensor check light doesnt come on but the car is still doing the same thing

Like
Report

Share:: Facebook; Twitter; Other

Answers. 1 helpful answer below.

by Moosemose on February 18th, 2009
Vacuum Leak? Bad throttle shaft? EGR Valve? Test with a Vacuum gauge, if low, spray WD 40 or carb cleaner around manifold, carb etc. to find leak. John
Comments
Add a comment...
- Like
- Report
No comments. Post one | Permalink

Did this answer your question? If not, then ask a new question or create a poll.

More Questions. Additional questions in this category.

Where is the O2 sensor on a Mitsubishi Eclipse?
by Answerbag Staff on August 17th, 2010 | 1 person likes this
Is there a front grille cover on the Eclipse?
by Answerbag Staff on June 6th, 2010 | 1 person likes this
I have a 97 mitsubishi eclipse gst I had the wipers and radio on went I had the booster cables connetedidk if there's a short all fuses and
by danielelking91 on July 15th, 2010 | 1 person likes this
Where would i find a fuse box diagram for a 97 mitsubishi eclipse?
by PureWateR on August 15th, 2010 | 1 person likes this
How do I buy a'98 Eclipse transmission computer?
by Answerbag Staff on May 3rd, 2010 | 1 person likes this
More Mitsubishi Eclipse See only professionally researched Mitsubishi Eclipse questions

You're reading My 98 eclipse spyder 2.4l idle runs rough after engine has been running for a while had error codes read camshaft sensor and cylinder 1 misfiring change spark plugs and camshaft sensor check light doesnt come on but the car is still doing the same thing

Follow us on Facebook!

Related Ads

Professionally Researched

ANSWERBAG BUZZ

Eclipse 2 4l motor

Mitsubishi eclipse runs rough

Vacuum leak on my 2003 mitsubishi eclipse 2 4 engine

Idle change 2 4

2 4l eclipse engine

About Us

About Answerbag

Sitemap

Professionally Researched Questions

Legal

Privacy Policy

Terms of Use

Disclaimer

Ad Choices
Follow Us on Facebook

Answerbag.com
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!
Latest Tweet

What is a movie that was ignored you thought great? http://t.co/FsBFmVd7

Follow Answerbag on Twitter!

Answerbag

Question

My 98 eclipse spyder 2.4l idle runs rough after engine has been running for a while had error codes read camshaft sensor and cylinder 1 misfiring change spark plugs and camshaft sensor check light doesnt come on but the car is still doing the same thing

Answers. 1 helpful answer below.

Comments

Did this answer your question? If not, then ask a new question or create a poll.

More Questions. Additional questions in this category.

Follow us on Facebook!

Related Ads

Related Questions

I have a 2000 Pontaic Grand Am 2.4 4cyl. The car runs rough & check engine light is on. I hooked it to a diagnosis machine. Code read that the #4 cyl was misfiring. I replace all the plugs & wires but the car is still doing the same thing. Please help?

I have a 98 mitsubishi eclipse and sometimes it wont start.When this happens the coilpack has no spark,and there is no current to the coilpack.I've replaced the PCM and the camshaft sensor and it still does it.Can anyone help me?

2000 jeep wrangler misfire in cylinder 4, what could be the cause? Changed plugs, coil rail, valve springs, oxygen sensor, camshaft sensor, switched # 4 injector to #5 still misfiring. Power to all injector wires, have compression in #4 cylinder.....?

1994 Pont. Grand Prix 3.1. When car sits for a week, and after it rains, engine starts with rough idle, no acceleration. After half hour of warmup it starts to smooth out and runs good. No check engine light. no codes on scanner. New plugs, wires, coil pa

I have a 95 Nissan Altima thats dying at idle speed. The ECM is giving codes for the Camshaft position sensor circuit, and No. 4 cylinder misfire. I think I'll start with plugs and wires what do you think?

Professionally Researched

Will a car run with a faulty camshaft position sensor?

Is there a camshaft positioning sensor in a Saturn?

Where is the camshaft position sensor located on a 1995 Ford Windstar?

Where is the camshaft position sensor on a 1996 Ford F250 Power Stroke diesel?

Where is the camshaft sensor on a 2005 Frontier?

ANSWERBAG BUZZ

Answerbag.com
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!

Question

My 98 eclipse spyder 2.4l idle runs rough after engine has been running for a while had error codes read camshaft sensor and cylinder 1 misfiring change spark plugs and camshaft sensor check light doesnt come on but the car is still doing the same thing

Answers. 1 helpful answer below.

Comments

Did this answer your question? If not, then ask a new question or create a poll.

More Questions. Additional questions in this category.

Follow us on Facebook!

Related Ads

Related Questions

Professionally Researched

ANSWERBAG BUZZ

Answerbag.com Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!

Answerbag.com
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!