- NEW!
by G_tech on November 5th, 2008
Others item to check:
change power cord to PC or check connection
When you changed power supply did you clean inside of case of dust and lint,paying good attention to CPU fan.
Next check if this is not problem, unplug every thing to PC except Monitor(printer,scanner,speaker system etc)see if problem goes away. If so add back item one at a time, if problem appears again, then check the cord for this item as it may be kinked or badly twisted or something sitting on it etc and causing a short to system, if so replace cord.
hope this helps
My power supply stopped working after I tried to scan with my new color laser printer on. Both heavy power users. I checked and am sure the PSU is bad. I installed a new PSU and everything powers up but I can't get a picture. Tried resetting the BIOS.
by metalman on July 8th, 2009
| 1 person likes this
What is wrong with my laptop power cord?
by TheWalrus on October 30th, 2010
| 1 person likes this
Sir my desktop monitor gives shock nd current when it is on .PLz tell me the reasons nd possible solutions.
by himu99 on July 1st, 2009
| 2 people like this
On my x50z asus laptop i had to press power s/w tens of times sometimes three imes and some other times from first time to get my laptop on,bearing in mind that it actsthe same thing when i use express gate s/w which means that the problem is away from po
by murad on August 7th, 2009
| 1 person likes this
My laptop's health monitor says that the fan speed is 66%. Is that too high, and if so, what should I do?
by HTFfan on July 30th, 2010
| 1 person likes this
You're reading My computer is repeatedly shutting down and powering up for seconds at a time when I turn it on, until I cut the power. I had recently replaced what was thought to be a bad Power Supply with a newer one and it's still making the same probl
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!
Comments