- NEW!
by tqvoraw on July 20th, 2008
Remove the components of the dash below or around the lighter. This might be by reaching behind plastic fittings to make the center pin of the holder pop up, allowing the fitting to be removed, then the plastic. Or you might need to use a philips head screwdriver and disassemble the necessary parts to get to your dash. Then the cigarette lighter holder can be removed from behind. Some of the Toyotas will have a slide that pins the whole thing to the dash. The lighter itself has a two wire connector that pulls straight off the lighter.
Finding a replacement is tough. Check with your dealer. On a truck, we had ours fail -- and it was some kind of small jumper wire for the center post (+) that died. These are crimped on rather than soldered -- maybe because of the heat?
Will a 1991 toyota corolla 1.6L 4A-FE engine and auto transmission work in a 1985 toyota corolla with engine 1.6L 4A-LC with auto transmission?
by Anonymous on August 11th, 2009
| 1 person likes this
on a 1995 toyota corolla the ignition relay switch came off.wires put back on relay in a bad position.what is position of wire to the relay?
by page.mason1 on November 12th, 2011
| 1 person likes this
how do i locate the screws that need to be removed from the fuse box by the battery of a 1990 toyota corolla? i found one where is the other
by shenkadelic on April 26th, 2010
| 1 person likes this
I have a 1999 toyota carolla 1.6gs car and it won't lock with the key fob, i have changed the fob batteries. can you reset the central locking?
by stewy10 on July 17th, 2009
| 1 person likes this
Does a 1990 toyota corolla hve a switch to control the electric fans?
by mark on April 20th, 2009
| 1 person likes this
You're reading THow do I replace the cigarette lighter socket on a '98 Toyota Corolla?
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!
Comments