- NEW!
Help answer this question below.
1) Turn the Car 'ON', but do not start the engine (Leave your foot off the brake). Cycle your trip reset knob until it reads ODO. Turn the ignition back off. Wait a couple of seconds.
2) Make sure seat belt is not fastened
3) Turn the ignition back on, do not start the car (Leave you foot off the break) As soon as you see everything light up, press and hold the trip reset knob and do a long 12 second count.
4) Keep your finger on the trip reset knob. Fasten your seat belt, as soon as you fasten your seat belt, you should see the ODO display go from XXXX miles to "b-on". At that time take your finger off the trip reset knob and press it again. It should cycle to "b-off". You should be all set and turn the ignition off and unfasten your seat belt.
http://www.toyotanation.com/forum/t67377-4.html
As this video shows though..don't forget to buckle up!
Yes! You can get a valet key for about $10. Go to shhding.com
This process also works on a 2006 Toyota Corolla
This process also works on a 2006 Toyota Corolla
What Type of Transmission Fluid Is Used for a Toyota Corolla?
by Answerbag Staff on August 19th, 2010
| 1 person likes this
I have broke the tip off of my key to my 94 Toyota pickup, how can i get the ignation to turn ?I cant get a key made .thanks asap please
by info_4_mexican on December 5th, 2010
| 1 person likes this
Where is the obd port on a 1993 toyota corolla?
by Answerbag Staff on August 15th, 2010
| 1 person likes this
Can you put a tow bar on a Toyota Corolla 1990 FX GT hatchback?
by Answerbag Staff on August 14th, 2010
| 1 person likes this
Can I put a 6 cylinder engine in a 2007 Toyota Corolla?
by Andrew47D on December 10th, 2010
| 1 person likes this
You're reading Does anyone know how to disable the seat belt reminder in a 2005 Toyota Corolla?
Comments
worked on my 2008 corolla. the timing on how long you wait before bucking the belt seems to be a bit sensitive. might need to try a few times before seeing "b-on"
by wagonfullapancakes on February 3rd, 2008