I recently bought a Durabrand DVD player and suddenly it has stopped playing any DVD's. This happened after we played a burned DVD. Now, the disc will spin and "loading" displays on the TV,after 30-60 sec. it will stop. What should I do to fix this?

Just a thought, You can try unplugging the dvd player for about 2 or 3 min. then plug it back in. If it still will not work and the disks are clean. You may need to just go out and buy another player, ( one of better quality if you can afford it as the durabrand palyers are a generic player and usually do not last very long) I learned this from buying our kids one for their tv, lasted about 4 or 5 months then pretty much done the same thing as yours has. Was able to get it to work a few times by unplugging it and plugging it back in after a few min. But it finally just plain quit. The store wouldn't take it back because we had owned it for more than 90 days. Bought a Sanyo and have had it for almost 2 years now without any problems.
P.S. might see if it is still under warranty. If so take it back and get another one if you haven't owned it over 90 days.

Comments

ok, Im not sure where I add anythign to my question so I'll put it here, I discovered that the player will play CD's just fine, not DVD's...so it seems that the lens is fine. Could I may have done something wrong when I tried to play a burned DVD?
- Report
by LibbyChong on December 16th, 2006
check the yellow plug on the back of the dvd player to make certain that it is fully plugged in to the dvd player, also check the connections at the vcr or tv to make sure they are fully plugged in, as it sounds as though you may have a vidio cable loose.
- Report
by scotty2006 on December 16th, 2006
I do not think that by playing a burnt dvd that you have caused any problems, I believe that either a cable has come loose for the vidio or maybe the tuner selection has gotten changed by accident.
- Report
by scotty2006 on December 16th, 2006
I am sorry I had to reread your question since it says loading but you never get a vidio picture, I would still unplug the dvd player and let it set a few min. then plug it back in and see if it doesn't cure the problem as the dvd player may have a logic issue and unplugging it will reset the player. it is ovious that the cables are ok or you wouldn't get loading on the tv displayed. Sorry for the confusion just ignore the last two comments.
- Report
by scotty2006 on December 16th, 2006
i know these will play burned dvd's as i've played several in mine and it's been o.k.. I don't see a reset button either anywhere on the player.
- Report
by lisaahart on April 16th, 2007
They don't have a reset button, I believe that the problem with the burnt disk is that the reigen code wasn't burnt to the disk properly or at all.
- Report
by scotty2006 on April 16th, 2007

Question

I recently bought a Durabrand DVD player and suddenly it has stopped playing any DVD's. This happened after we played a burned DVD. Now, the disc will spin and "loading" displays on the TV,after 30-60 sec. it will stop. What should I do to fix this?

Answers. 4 helpful answers below.

Comments

Comments

Comments

Comments

Did this answer your question? If not, then ask a new question or create a poll.

More Questions. Additional questions in this category.

Follow us on Facebook!

Related Ads

Related Questions

My Samsung DVD player suddenly quit playing DVDs in mid-disc (it says "Loading" for several minutes, then says "This disc cannot be played") but it still plays CDs, including MP3 CDs I burned. Cleaning the lens did not help. Is the player broken?

I HAVE A SANSUI COMBO TV/DVD PLAYER. DURING CHRISTMAS I PLAYED SOME CD'S ON IT. NOW IT WILL NOT PLAY ANY DVD'S. IT KEEPS SAYING INCORRECT DISC WHEN I PUT ONE IN. IS THERE ANYTHING I CAN DO IT FIX IT?

My APEX 3800 DVD combo stopped loading after the drawer closed prematurely on a DVD video I was loading. Now it doesn't play DVD discs. When a disc is inserted it displays "loading" and then "no disc". What can I do to make my DVD play again?

I recently bought a Toshiba SDK990KU DVD player and the dvd will not open. Am I missing something? Any ideas?

My DVD player stopped playing DVD's. When I turn the player on, the picture screen starts rolling. I can see the logo on the screen and see "loading" at the top, but the screen won't stop rolling. First I got a dark screen, now I get the rolling instead.

Professionally Researched

Will a 1080p DVD player work on a 720p TV?

Do old TVs that incorporate VHS players have inputs for a DVD player?

Can i burn tv programs from a computer to a dvd player?

How do I hook up a DVD player to an older TV?

How Do I Hook Up a Dvd/Vcr Combo Player to a TV?

ANSWERBAG BUZZ

Answerbag.com
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!

Question

I recently bought a Durabrand DVD player and suddenly it has stopped playing any DVD's. This happened after we played a burned DVD. Now, the disc will spin and "loading" displays on the TV,after 30-60 sec. it will stop. What should I do to fix this?

Answers. 4 helpful answers below.

Comments

Comments

Comments

Comments

Did this answer your question? If not, then ask a new question or create a poll.

More Questions. Additional questions in this category.

Follow us on Facebook!

Related Ads

Related Questions

Professionally Researched

ANSWERBAG BUZZ

Answerbag.com Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!

Answerbag.com
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!