More Magnavox TVs.

i Have an old magnavox star crt tv. what would cause it to stop turning on.sometimes it turns on for a couple of seconds then shuts off
by rex.smalley on June 17th, 2011 | 2 answers | in More Magnavox TVs

by Anonymous on December 31st, 1969 | no answers | in

i have a magnavox TS3553 tv and all i want to know is what is the S-VIDEO input for?
by larrye50 on October 2nd, 2010 | 2 answers | in More Magnavox TVs

I Have A 48" Philips Magnavox Projection TV Model # 8P4844C101. The Picture Is Really Blurry & Everything Looks Like It "glows".
by stemohon on August 22nd, 2010 | one answer | in More Magnavox TVs

How too add a headphone jack to a magnavox mt1901 tv
by sylmar77 on February 13th, 2010 | no answers | in More Magnavox TVs

My magnavox tv turns on but will only stay on for a matter of seconds. how do i fix that? please help!!!
by Anonymous on December 7th, 2009 | no answers | in More Magnavox TVs

I have a Magnavox TV Model # MSD724G, and off by itself. When I press the remote control to move the channels up or down, and or the volume up or down nothing occurs. I removed the bateries believing that the problem could be the remote control.
by nyfb4u2 on December 3rd, 2009 | no answers | in More Magnavox TVs

I have a Magnavox MSD724G, TV/DVD Player Combo, and the TV comes on and off by itself. Also when the TV gives time I try to move the channels up/down, and volume up/down and nothing. I remove the bateries believing that the problem could be the caused by
by nyfb4u2 on December 3rd, 2009 | no answers | in More Magnavox TVs

Magnavox smartseries tv Ms3250C321 purchase in Nov,2002. The picture just shuts off,but the red power light stays on. To get the picture to come back on, we go up or down one channel, then back to the original channel. It repeats this often.
by Anonymous on November 20th, 2009 | no answers | in More Magnavox TVs

I have a Magnavox 37mf23id/37 that doesn't power on for about 20 minutes after you turn it on, what could it be?
by goasti on October 26th, 2009 | no answers | in More Magnavox TVs

How do i add channels to my Magnavox # 27f700/7583, i do not have the original remote.
by rjorsborn on October 18th, 2009 | one answer | in More Magnavox TVs

My tv will turn itself off. It is a 50ML8105D/17. I have tried cleaning the unit but doesn't seem to help. any suggestions?
by Anonymous on October 13th, 2009 | one answer | in More Magnavox TVs

19 inch philips magnavox t v dead Is there a fuse inside cabinet?
by Tex on October 10th, 2009 | no answers | in More Magnavox TVs

Magnavox MS3450C321 "buzzes" when graphics come on screen. All others in home OK. ON Sat, Dish net. Have adjusted all audios no help.
by Anonymous on October 3rd, 2009 | no answers | in More Magnavox TVs

I have a 52" projection magnovox tv. I used the flashback button and the screen froze and then shut off and won't come back on. What could the problem be?
by Anonymous on September 18th, 2009 | no answers | in More Magnavox TVs

I have 61" Phillips Magnavox rear projection, about 10yrs old. The picture bounces in and out. It goes in real small, or completely gone, then it bounces out, continuously... any ideas?
by Anonymous on August 29th, 2009 | no answers | in More Magnavox TVs

I have a Magnavox 60in projection t.v. it is a PTV910 and when i turn it on the blue and green light come on, the red does not, and all i see is a blue screen. I cant see the volume or channel display just blue and i have no sound. HELP PLEASE!
by kasieletice on August 17th, 2009 | no answers | in More Magnavox TVs

How do i find the reset button on my 32 inch flat magnavox tv
by martavis on August 13th, 2009 | one answer | in More Magnavox TVs

I have a 2001 55 inch Magnavox model number 55p8288. The TV has an orange tint to it, it looks like a black and white tv but instead of white it is orange. Any suggestions on what the problem might be and how to fix it would be great.
by Dodge506 on July 14th, 2009 | no answers | in More Magnavox TVs

I have a really old (1988) Magnavox TV, model CH3930 BL. This set requires you to tune each channel and select a channel number to display, before you can use the UP and DOWN channel selector buttons on the user panel. Does anyone have a user guide?
by answerbagfan on July 2nd, 2009 | no answers | in More Magnavox TVs

I have a really old (1988) Magnavox TV, model CH3930 BL. This set requires you to tune each channel and select a channel number to display, before you can use the UP and DOWN channel selector buttons on the user panel. Does anyone ha
by answerbagfan on July 2nd, 2009 | no answers | in More Magnavox TVs

I have an analog magnavox tv set up to digital box, it was working fine until I turned it on today. Now it comes on for a minute and cuts off. I have disconnected it from the digital box & it stills cuts itself off. Does anyone know what t
by Sharree on May 9th, 2009 | no answers | in More Magnavox TVs

How do iget a diagram for magnavox tv mwctsb
by fathead on April 17th, 2009 | one answer | in More Magnavox TVs

My 42" Magnavox Plasma seemed to have split it's screen. There is a black line down right side about 4 inches in. to the right of the line is what should be all the way on the left side of the screen. It seems to have "shifted" it%2
by Anonymous on April 13th, 2009 | 2 answers | in More Magnavox TVs

I'm at a hotel and want to hook up my own dvd player. Problem is the tv will not let me change the channel to 3 0r 4. Anyone know how to unlock this type. It's a magnavox 19 in.
by debidoes04 on March 14th, 2009 | no answers | in More Magnavox TVs

I have an old magnavox t.v. that has gone into a showroom mode. I can't override it or control any buttons on the t.v. or the remote. It just runs through a continous series of the t.v.'s features as if it were on a showroom. How do I rega
by Anonymous on March 8th, 2009 | one answer | in More Magnavox TVs

Can you use a 32" hdtv(magnavox) to repair a 37" hdtv(magnavox)?
by wash1 on March 5th, 2009 | no answers | in More Magnavox TVs

How do I connect my Magnavox DVD player to my 2003 Magnavox TV. My cable is already connected and is working fine. But I want to connect a DVD player that I just purchased. Help!!
by Anonymous on February 21st, 2009 | no answers | in More Magnavox TVs

Have a magnavox lcd tv and the model number is 37mf231d/37. No Power. The fuse is blowing as soon as the power cord is plugged in is this related to the 2074 capacitor problem
by dk00913 on February 19th, 2009 | one answer | in More Magnavox TVs

Magnavox TV plays well but frequently display "ba4-0.16 e5" with no sound (picture continuing to come up though). When we switched off/on, it plays well for few minutes then the above repeats. Any suggestion?
by Anonymous on February 15th, 2009 | no answers | in More Magnavox TVs

Black flickering bars are all over the screen when playing video game.
by Rob Charlton on February 5th, 2009 | no answers | in More Magnavox TVs

I have a 2001 magnavox 60" big screen and 1 of my channels is locked by auto locked and i would like to know how to unlock this channel
by whodog on February 1st, 2009 | no answers | in More Magnavox TVs

Do you have a technical support number for Phillips Magnavox tv's? I can not get it programed for Direct Satellite TV
by Nita on January 20th, 2009 | one answer | in More Magnavox TVs

I have a 94 magnavox rear proj. 52 inch, everything works except the screen as a about 6 inch yellowish smuge in the center of the screen and kind of around the whole screen itself.... do i need a new screen for it? if so where do i get on
by Anonymous on January 2nd, 2009 | no answers | in More Magnavox TVs

Magnavox VCR/DVD player, 1 yr. old. Power shuts off after playing tape for 6 secs. NO dirt/dust inside but tryied using cleaning tape and canned air. Any ideas what's going on with it? Thanks
by Anonymous on December 16th, 2008 | no answers | in More Magnavox TVs

I have a Magnavox 37mf337/37 LCD flat screen. Turned off on its own, and won't come back on. Any ideas to why? How can I fix it? I'm open to all suggestions.... Thanks
by olsontw22 on December 14th, 2008 | 4 answers | in More Magnavox TVs

I have a magnavox 32g700 585 get perfect picture and no sound connected to cable. when it was on antennae signal I got sound on one uhf channel.
by Anonymous on December 5th, 2008 | one answer | in More Magnavox TVs

Magnavox TV, model 27TS52. The picture has changed to a 1/4" horizontal line accross the middle of the screen. Evident that the picture is withing the line. Appears as if the vertical adjust has been made. How to recover?
by Rich on November 11th, 2008 | no answers | in More Magnavox TVs

I have a 6yr old magnavox 32" tv that, while earlier this morning worked fine, just makes a ticking sound from the base whenever plugged in,but the set does not come on. Any suggestions, thanks
by Anonymous on September 22nd, 2008 | one answer | in More Magnavox TVs

I was having trouble with my television not getting a signal. After checking for obvious problems, I found some information that suggested I unplug the set for a few hours. It worked, and my question is why did it work.
by chemE418 on September 13th, 2008 | 4 answers | in More Magnavox TVs

Can anyone help me find the codes and programming instructions for a 4 in 1 philips magnavox universal remote that I'm trying to program for my GE tv?
by Christine on August 15th, 2008 | one answer | in More Magnavox TVs