What is Answerbag?

Ask questions and share your knowledge with the world here on Answerbag. Get the best answers where there are no duplicate questions and questions are always open - our community of over 1,142,000 will find your answer!

Join For Free!
 

How Does a Disk Brake Pad Work?

Friday, December 12, 2008
Related Tags: disk | fluid | pads | drum | friction
 

Instructions

Semi-metallic Design

  • Step 1:
    Most disk brake pads are made from highly-refined, semi-metallic metal. These types of disk brake pads, which are pretty standard on most passenger cars and trucks, are highly wear-resistant and effective at reducing friction generated heat between the disk brake pads and disk brake rotors. Disk brake pads are engineered to withstand high heat and friction.

Disk Brake Pad Stopping Action

  • Step 1:
    On cars that have both a disk brake and drum brake, the disk brake performs the majority of the stopping power. Normally, a disk brake will be in the front of a vehicle, and the drum brake will be in the rear. The reason for this is due to the fact that when a car's brakes are applied, the majority of the car's weight is transferred towards the front of the car, which applies much greater strain and force to the front brakes. A disk brake pad handles roughly 70 percent of a car's stopping power. Therefore, a disk brake pad, although highly wear-resistant, wears out much sooner than a standard drum brake.

Brake Fluid and Disk Brake Pads

  • Step 1:
    The squeezing action of a disk brake pad against a disk brake rotor is made possible by hydraulic brake fluid. Instead of using a cable to manually squeeze the brake pad against the rotor, hydraulic brake fluid is used to supply the squeezing force. Brake fluid lines route the hydraulic brake fluid into each disk brake caliper, where the pressurized brake fluid pushes against the brake pads, causing them to move, or squeeze, against the disk brake rotor.

How Does a Disk Brake Pad Work? Provided by eHow.com
Related Content
How Brake Rotors Work
Instructions The Rotor or Disc Step 1: Disc brakes are named after the rotor. Most vehicles have used disc brakes in the front of vehicles for many years. Now, many vehicles are offering four-wheel...
Problems With Car Brakes
Repairing a car's brake system is often regarded as a difficult process. However, the biggest challenge most often comes from diagnosing the problem. It is only once the source of the problem can...
What Are Rotors in a Car?
A brake rotor is a round flat piece of steel attached to a rod that is held in place on the inside of the wheel. On either side of the rotor are brake pads. When you apply the brake pedal on the...
How Do Car Calipers Work?
Instructions The Caliper Step 1: The caliper on the disc brakes of a car hugs the brake pads to the side of the rotor (also known as disc). The pads are located on both sides of the disc and the...
10 Brake Problems
Brake problems can consist of malfunctioning components that include the pedals, rotors, brake pads/discs or master cylinder--the key components of a brake system. Caused by a defect or wear and...