ANSWERS: 2
-
Bad cables & battery should be checked first & then check for "Codes". John
-
I bet you've got either a loose connection at your battery, or a lot of corrosion on your terminals. Undo the terminals from the battery to clean them good. Get a wire brush and some baking soda and water. Mix the baking soda and water into a paste, and scrub your battery terminals, and cable terminals clean with the wire brush and paste. Dry them up and re-tighten your cables back to your battery. You shouldn't have any more problems.
Copyright 2023, Wired Ivy, LLC

by 