ANSWERS: 1
-
If the ABS is flashing there is a definate problem and resetting the light will only work temporarilly. Check fuses first. There is a 60amp ABS fuse in the fuse box under the hood. There is also a 15amp air conditioner fuse inside the vehicle fuse box. After this you need to check voltage at the ABS relay on two wires. Black & red to ground should be battery voltage. White wire to ground should also be battery voltage. The key must be turned forward during testing. The wires can only be seen from the underside of the fuse box. If there is battery voltage on both wires and the relay is good you have to go into some harder wiring diag. especially if you don't have the experiance. It could even end up being the ABS control module.
Copyright 2023, Wired Ivy, LLC

by 