ANSWERS: 3
-
um... is your brake fluid low? sounds too simple, but i had a big freak out when my light went on, turns out the fluid was low. i always look for the simple stuff first.
-
Did you adjust the switch when you installed it? Normally you need to push the switch all the way into the mounting hole with the brake pedal depressed, then release the brake pedal and gently pull up on the pedal to move the switch into the proper adjustment.
-
Brake lights on the back of the car would be an adjustment problem with the switch.. Brake light on the dash would be low fluid... Just wanted to clear that part up.
Copyright 2023, Wired Ivy, LLC

by 