by 
Digz345
ANSWERS: 2
Visit the Gallery today!
Decorate your life
Ad
-
From http://homemadebong.com/ ---- Take a 1-litre plastic bottle and put two holes in it, one about halfway down the bottle and the other on the opposite side about an inch up from the bottom. Take the hose and insert it in the lower hole. Hold the pipe up at about a 60 degree angle so that the bottom of the pipe is almost at the bottom of the bottle and the cone is sticking up as much as possible, and seal it in place (make sure the hole is glued or sealed airtight). Fill the bottle up with water to about half way between the two holes. Then hold the bottle straight up so that the bowl is pointing up and away from you. Now all you have to do is put your bud in the cone and suck through the top of the bottle (now a mouth piece). Here is a website that shows you how to do a gravity bong: http://www.bukketshop.com/making-bongs.html
-
Drop your head about four inches forward and down, and charge into the sliding glass door.
RELATED QUESTIONS
Copyright 2023, Wired Ivy, LLC