- NEW!
by TonieMoral on September 4th, 2010
these are drums or discs on the rear?
is it just one drum or both? or is it the parking brake?
Did you put it on a lift and take a look? we need some more info if you want help.
if it's a stuck drum you can break it free. just need a few screwdrivers or a drum brake puller.
did you change the rotors as well as the pads? if not did you turn down the rotors?
What is the differential fluid capacity for a 1993 Chevy truck?
by Answerbag Staff on August 23rd, 2010
| 1 person likes this
Where is the inbound speed sensor located on a 2002 Chevrolet Venture?
by Answerbag Staff on August 17th, 2010
| 1 person likes this
Where is the fuel filter located on a 1977 Chevy 2500 4x4?
by Answerbag Staff on August 18th, 2010
| 1 person likes this
I have a 86 chevy with a two barrel throtal body carb and i want to switch to a 750 holley 4 barrel, will this mess with my elctronics
by JoshK on May 27th, 2011
| 1 person likes this
WHEN TIGHTEN DOWN ROCKER ARM NUTS DO U HAVE TO TIGHTEN DOWN INTAKE OR EXHAUST FIRST
ON 1996 CHEVY 4.3 MOTOR
by angela.cottrelljohnston on July 10th, 2011
| 1 person likes this
You're reading My father in law and I just replaced the brakes on his 2001 chevy blazer lt and now it hangs up on the rear brakes and will not let up.
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!
Comments
Discs all the way around . and both back ARE sticking and we had the rotors turned. we did this on the ground and I checked the e brake and it is loose at rest but not sloppy lose. the e brake only goes down A little past half way.this is the second time the brakes have Ben changed on this blazer and the mic looks good 4 the rotors.
by camaroguy803 on September 5th, 2010