- NEW!
Help answer this question below.
If possible, you should fire it up and hear what signals it receives.
But keep in mind that as more and more radio stations convert to digital broadcasts, "olde style" radios, such as the Farnsworths and Atwater-Kents, will not be able to adequately process and decode incoming digital signals.
Eventually, those antique radios will be totally useless, and will receive only static.
+5
Old radios will still pick up LW, MW and SW transmissions. With tube sets of that age you have to be careful as capacitors can dry out and the insulation of the power transformer can break down. If you have a set of that vintage that hasn't been used for years it's wise to start it on a variac (variable AC transformer) and wind it up slowly keeping an eye on the internal workings to make sure there's no problems.
What is the best way to boost both the transmiting and recieving of signals from your ham radio?
by eclectic2 on August 31st, 2010
| 1 person likes this
my 1998 ford taurus radio stopped working the clock on it works sometimes.the tunner will come on sometimes but wan do anything
by freebird41 on July 8th, 2010
| 1 person likes this
What range of radio frequencies is the government watching?
by Anonymous on June 28th, 2010
| 1 person likes this
how to find out frequency in my titanium plates in face.I was in an accident in 1998 i have picked up a signal and need to find it out.
by ShawnWest on August 15th, 2010
| 1 person likes this
I BOUGHT A 1991 GMC SIERRA AND SOMETIMES THE RADIO WORKS SOMETIMES IT DOESNT WHAT CHOULD IT BE PLEASE HELP
by EGON45 on July 13th, 2010
| 1 person likes this
You're reading If you have got an antic radio-wireless receiver- what is the pecularities of that old set and if it is at least 50 years old could it be receiving still the broadcastings from the world's long, medium, short wave stations?
Comments