Open an Internet Explorer browser page...In the address bar type - 192.168.1.1 Leave username blank & in password use admin in lower case... Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab... 1) On the first line in Application box type in Xbox, in the start box type in 88 and End box type in 88, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box... 2) On the second line in Application box type in Xbox1, in the start box type in 3074 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box and click on Save Settings... 3) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings... 4) Click on set-up and change the MTU Size to 1452 and click Save Settings... 5) Now assign the given ip address on your Xbox ip address :- 192.168.1.20, subnet mask :- 255.255.255.0, default gateway :- 192.168.1.1... 6) Also assign the dns addresses on the Xbox Primary dns :- 4.2.2.2...Secondary dns :- 192.168.1.1 7) Turn off your modem, router, and Xbox...Wait for a minute... 8) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect... IF THIS BASIC SETUP DOESN'T SOLVE ANYTHING, you may need to upgrade your firmware... If THAT doesn't work, Go get a wrt series for God's sake... :)