- NEW!
Help answer this question below.
Use a Manual gauge on it after first allowing it to run momentarily (10 seconds) without anything in the hole. This will push out any "Crud" that may be moving back & forth, "Blocking" flow to the sensor. Then check the wire connections especially the "Grounds" & clean the paint off to bare metal. If still bad replace Sensor. John
Why Does Diesel Motor Oil Turn Black?
by Answerbag Staff on August 15th, 2010
| 1 person likes this
How does one know of being "fully satisfied"?
by pearloaf is not yelling and dreams of bal on October 28th, 2011
| 1 person likes this
What type of motor oil is used for propane engines?
by Answerbag Staff on August 12th, 2010
| 1 person likes this
What is a safe oil temperature?
by Answerbag Staff on August 11th, 2010
| 1 person likes this
Does fully synthetic oil need to be changed as often as regular mineral oil?
by Pintapride on September 21st, 2011
| 2 people like this
You're reading The oil sensor on my golf v keeps flashing eventhough the oil pressure is full what is the remedy?
Comments