by Jimmyz101 on October 16th, 2006

Jimmyz101

Question

Help answer this question below.

Do the photo labs that develop your 35mm film use the darkroom technique for printing the developed film onto paper or do they develop the film then use a film scanner and print using a printer?

Answers. Showing one answer.

  • by msummers10 on October 16th, 2006

    msummers10

    Photolabs today use a machine to do all the work. The roll is placed in a holder while the end of the roll is taped to a leader card. The holder is inserted into the machine(at least the machine that I use, a MasterLab). The machine extracts the film from the canister, runs it through 4-5 different chemicals, and then sends it out through the dryer. The film is done processing. After processing is finished, the film is inserted into the film deck, making sure to note which side the DX-code is on. All I have to do is line up the first photo in the film deck, and press Auto. They scan. After the finish scanning, some should already be coming out of the printer. All that's left to do after they print and you make sure that there isn't anything wrong with the pictures is to cut the negatives.

    To answer your questions simply, they do a mix of both. The machine develops the film, then uses the darkroom technique to project light through the negatives onto the blank paper. After running the exposed paper through chemicals, the picture shows up.

    Comments
    • So much for the personal touch, but it is a lot cheaper than it use to be. We use one time use cameras and ask for a disk. The prints are a bonus that we can mail to friends. Still cheaper than digital and my printer

      Randy

      by Randy on March 10th, 2009

    • Like
    • Report

    1 comment | Post one | Permalink

Want to attach an image to your answer? Click here.

Did this answer your question? If not, then ask a new question or create a poll.

You're reading Do the photo labs that develop your 35mm film use the darkroom technique for printing the developed film onto paper or do they develop the film then use a film scanner and print using a printer?

Follow us on Facebook!

Related Ads