• It is pretty simple. You need to connect the positive and negative left and right speaker wires from the car to the corresponding inputs on the L.O.C. You plug RCA cables into the L.O.C. and run them to the inputs on the amp. You can do this behind the radio, at the factory harness. You can also grab the speaker wires at the rear deck, directly from the speaker feeds, if you have a sedan with rear deck mounted speakers. If you have rear speakers in the doors, you can also grab them from the wire harnesses that run back and into each rear door. Behind the radio is the best option, just in case you change to an aftermarket radio down the road. It will mean that you have the RCA cables, that run to the amp, behind the radio, where they belong.

Copyright 2020, Wired Ivy, LLC

Answerbag | Terms of Service | Privacy Policy