You need to make sure the caliper is free to slide on the caliper slide pins. See the text and picture below.. 1. Remove the disc brake caliper from the mounting bracket. 2. Remove the disc brake pads from the disc brake caliper bracket. 3. Remove the disc brake pad retainers from the disc brake caliper bracket. 4. Remove the caliper pins from the disc brake caliper mounting bracket. 5. Remove the caliper pin boots from the disc brake caliper mounting bracket. 6. Remove the caliper pins (2) from the disc brake caliper mounting bracket (3). 7. Remove the caliper pin boots (4) from the disc brake caliper mounting bracket. 8. Lightly wire brush all brake pad contact areas in order to remove any corrosion. Installation Procedure Lubricate the front brake caliper, bushings, bolts and seals with high temperature silicone brake lubricant. 1. Install the caliper pin boots to the disc brake caliper mounting bracket. 2. Install the caliper pins to the disc brake caliper mounting bracket (3). 3. Install the disc brake pad retainers to the disc brake caliper bracket. 4. Install the disc brake pads to the disc brake caliper bracket. 5. Install the disc brake caliper to the mounting bracket. Tighten the disc brake caliper bolts to 35 N·m (26 lb ft).