- NEW!
by yeroco on June 17th, 2008
Are you using an antenna or cable?
If antenna, is your antenna a UHF antenna too?
If cable, unless you have a cable box, you'll need to switch the TV's tuner into CATV mode, rather than antenna mode. This might be a switch on the front panel or available only via an on-screen menu.
Is there an adapter to convert coax to RCA audio/video out?
by Answerbag Staff on August 10th, 2010
| 1 person likes this
My RCA television display's unusable signal. I can't get cable or watch dvd's. I also used to watch cable on channel 3 and now my tv isn't even tuned in to get channel 3. What could be wrong and how do I tune in channel 3 again? This is a new 42 inch RCA.
by tashalou on July 16th, 2008
| 1 person likes this
What is a component video connector?
by Answerbag Staff on July 25th, 2010
| 1 person likes this
Is a digital coax cable the same as RCA?
by Answerbag Staff on July 18th, 2010
| 1 person likes this
Have a rca xl 100 with no manual. Only able to pull in channel 3 to 13 and a few other channels, do not see any settings to adjust. What can I do to correct this
by Coachbob on June 17th, 2008
| 1 person likes this
You're reading Have a rca xl 100 with no manual. Only able to pull in channel 3 to 13 and a few other channels, do not see any settings to adjust. What can I do to correct this
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!
Comments