ANSWERS: 1
-
on the back of the drives there anre jumper switches which are little rectangular blocks that fit onto pairs of pins on top of the drive or near the jumpers there will be a diagram showing how the set them up. you need to pull the jumper off and move it to a different position. the hard disk should be set to MASTER or PRIMARY and the CD-ROM to SLAVE or SECONDARY if they are on the same cable Alternately check your BIOS settings, hit F1 F2 F10 and DEL repeatedly just after turning on once you are in the setup see if there is an option to detect hard disks or set all the IDE chanels to AUTO. all bioses are different so i cant really be more specific
Copyright 2023, Wired Ivy, LLC

by 