- NEW!
by Wreckinball on September 30th, 2008
The cuase of your problem is not the switch. It is the resistor board. This part is located behind the glove box and is held into the HVAC plastic by two screws. It also has like 4-5 wires going to it (easy to find). The piece can be found at the dealer for about $20. I just fixed mine last night after work biggest problem was getting my big hands into the small space.
by sloppywet on March 16th, 2008
remove the cover the switch can be removed seperatly . replace it with a new one or from a wrecked jeep'
Where is the Jeep Wrangler crankshaft position sensor?
by Answerbag Staff on August 17th, 2010
| 1 person likes this
Can you get full doors and half doors on a Jeep Wrangler and just switch them whenever you need?
by ryguy on January 24th, 2011
| 1 person likes this
Does the 2000 Wrangler have posi trac or limited slip differentials?
by Answerbag Staff on July 26th, 2010
| 1 person likes this
Where is the fuel pump located on a 1999 Jeep Wrangler?
by Answerbag Staff on July 19th, 2010
| 1 person likes this
how far can a 1994 jeep wrangler go on a full tank?
by hitokaji on May 17th, 2011
| 1 person likes this
You're reading 2005 Jeep Wrangler Unlimited. At 5,000 miles fan/blower switch on dash only worked on setting 2, 3, & 4. At 10,000 miles only worked on setting 3 & 4. Now at 15,000 miles only works on setting 4. What is the best way to fix my slowly dying switch?
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!
Comments