- NEW!
Help answer this question below.
i have a rockford fosgate mono block amp and the protector light wont sut off why and how do i fix it
by Nick_P8096 on February 2nd, 2011
| 1 person likes this
Is it safe to hook up 2 subs to only one channel on a 2 channel amp?
by Casual318 on December 13th, 2010
| 1 person likes this
Will 2 subwoofers hooked up to a 2 channel amp still pound?
by Casual318 on December 13th, 2010
| 1 person likes this
i have a chevy s-10 extracab and want to install 2 10" subs and amp combo, what kind should i get and under $250? (space isn't a problem)
by mike on November 28th, 2010
| 1 person likes this
I am getting two 15" CVR kicker subs, which are 4ohms with maximum of 500 RMS, will an 1800 watt kennwood KAC-9104D be good for these subs?
by tgs198 on February 16th, 2011
| 1 person likes this
You're reading I am installing an amp in my car all of the wires are hooked up but still no sound from any speaker or the sub i checked all the fuses and none of them blew so idk whats wrong can any one help?
Comments
i checked the wires and it has power so i put my friends amp in and that worked could the amp be bad since i got it used
by SnoWchicken on January 5th, 2008
could be but some amps use 2 grounds. what kind of amp is it that you have
by car audio crazy on January 5th, 2008
its a sony xplode i had the sub hooked directly to my head unit because there is a direct wire for a sub and i didnt hear much difference so i was thinkin about jst bringin it all back and getting two twelves and going straight to the head would this be stupid
by SnoWchicken on January 5th, 2008
no that would be a smart move
by car audio crazy on January 5th, 2008
ok then i think ill go in on monday and get two twelves thanks for the help
by SnoWchicken on January 5th, 2008