1979 chevy, C 60 Need to ID rear end. No tag on it .13 bolts on rear cover and same on front housing.Single speed.36 teeth on ring gear, 5 on pinion.Has budd type hubs.16000 weight. any help appricated

More Questions. Additional questions in this category.

• 

  I am looking where I can find the fuse panel diagram in a 1979 Chevy k-10 pickup. I am having problems getting the heather fan working.
  by platinum1 on March 12th, 2008 | 2 people like this

• 

  I have a 1966 Chevrolet pickup truck, with a speed on the column . I would like to change to a three speed on the floor. Does the entire transmission have to be changed or just a change of the linkage setup to put in a floor shifter?
  by ardsee on January 19th, 2008 | 1 person likes this

• 

  What trailer brake controller should i use on a 68 chevy 3/4 ton
  by cheese on January 20th, 2008 | 1 person likes this

• 

  I need to know how to tune a rochester carb qudrajet it is a 4bbl it is for my 1975 chevy pickup or how many turns on the carb to get the right settings i talking about the fuel mixture. the motor is a 350 and automatic transmission th350
  by harrison on June 13th, 2008 | 1 person likes this

• 

  I have79 luv thought accelorator pump was bad has bad spot in acceleration where it seems like its not getting proper fuel but reves at idle
  by jdhutchens1122 on March 21st, 2012 | 1 person likes this

• More Pre-1980 trucks and SUVs See only professionally researched Pre-1980 trucks and SUVs questions