ANSWERS: 2
-
drop the trannsmission mounts(rear) then get a cherrypicker huked to the motor take a small amout of pressure off the truck pull out the mount bolts that attach to the frame. then lift a little more on the cherrypicker and pull out the bolts attaching the mounts to the block. then reverse for the install.
-
I just did one in my shop a few weeks ago and I had it up on the lift and worked through the wheel wells on both sides. I found I was able to do both sides in about 2 hours. It helps to remove the inner wheel well cover that hangs down onto the upper a-frames and is atteched with snap clips. remove the bolts from the motor itself first. make sure you support the motor. All-data has a good diagram of the procedure.
Copyright 2023, Wired Ivy, LLC