ANSWERS: 1
  • You are going to raise the hood and if you then look at the back side of the headlamp assembly, you should see some wiring running to a plug at the back of the headlamp assembly. You will want to rotate that plug around 30 degrees and you should notice that the plug becomes loose, you will then remove the plug from the headlamp, taking the bulb with it. Replace the bad bulb, reinsert the plug into the headlamp and rotate it back the other way to lock it back into place. This may require more force than you are comfortable with and you will want to be careful not to break anything. all of that plastic will break if too much force is applied.

Copyright 2023, Wired Ivy, LLC

Answerbag | Terms of Service | Privacy Policy