- NEW!
by Buckmaster on August 1st, 2008
I had a similar problem except my front wouldn't work and the back flashed quickly. If I tilted the steering wheel up it would start working. The cause was the wire plug that plugs into the multifunction switch (turn signal unit). The metal connectors on the wires are held in the plug by small plastic clips and a couple were broke which caused the connectors to work their way out of the plug. So I used some 5 min. epoxy and glued the connector back in the plug. It has fixed it for now.
by Anonymous on June 2nd, 2007
maybe its the flasher that needs replaced
How many oxygen sensors does a Ford Expedition have?
by Answerbag Staff on August 23rd, 2010
| 1 person likes this
Where is the EGR vacuum regulator located on a Ford Expedition?
by Answerbag Staff on August 5th, 2010
| 1 person likes this
Where is the ac port located on a 2002 Ford Expedition?
by Answerbag Staff on August 5th, 2010
| 1 person likes this
97 ford expeditipion, changed hearter core disconnected battery now truck wont stay running. starts but dies
by bobbyjoe0622 on March 22nd, 2011
| 1 person likes this
what would cause the manual off button not to work on a heater in a 2005 ford expedition the only way to turn off is to shut vehicle off
by Stephanie_S6792 on April 6th, 2011
| 1 person likes this
You're reading 1998 ford expedition .passenger side rear flasher and brake light don't work. The front flashes quickly. The driver side is fine. I changed the bulb no help. Sometimes it works fine
- which can also be phrased in the following ways:
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!
Comments