- NEW!
Help answer this question below.
some RCA sets have the video inputs as channel 0 or 00, some see them as channel 90 & 91
it will automaticly acceptit if the tv has the obility to and you have an rca remote or a high quality remote with the "input" function on the remote trust me there is no other way not even scrolling down all the chanels it was the most ass9 thing pancorp ever did
Do you have the F32668's owners manual...? You can get one and download it here for $10
http://www.online-owners-manual.com/f32668.html
Generally, however, it's not the TV you need to configure, it's the Cable/DVR box. Every TV that I've ever seen has simply accepted the input it's provided with once it's set to the proper channel (commonly this is either Ch2 or Ch4). But the manual for the Cable/DVR box will provide the info for that.
In lieu of the manual for the Cable/DVR box, a brief call to the tech support department at the cable company will usually take of these kinds of problems in short order (and where I'm from, they're open 24 hours a day...!)
Hope this helps... ;-)
What year was the RCA P52937SG manfactured?
by Alan1947 on May 3rd, 2010
| 1 person likes this
truflat tv stuck in standby mode someone has to have a solution but turn it on the red standby flashes and then stays red and wont turn on
by Mike_G on August 26th, 2010
| 1 person likes this
I have an older RCA 42" TV model number P46924 I would like to remove the plastic cover to clean...how do I do that?
by Andrew_Z499 on April 25th, 2011
| 1 person likes this
I have a RCA tv and the picture is almost squeezed down into like a line in the middle of the screen and the rest is black any ideas?
by sheenadrake8 on November 5th, 2010
| 1 person likes this
hosw do i change the fuzzy black and white screen on my tv to show tv channels again?
by JohnSdjkva on August 13th, 2010
| 1 person likes this
You're reading I have RCA model F32668. How do I set the TV to accept Video input for cable/DVR?
Comments