- NEW!
Open a browser and enter 192.168.1.1. Click "Wireless Settings." In the "Security Options" menu, select "WEP (Wired Equivalent Privacy)." Select "Automatic" in the "Authentication Type" drop-down menu. Select "64 bit" in the "Encryption Strength" drop-down menu. This will require the customer to use a 10-digit encryption key. Enter a 10-digit number in the field beside "Key 1." Click "Apply."
Open a browser and enter 192.168.0.1. Click the "Wireless Tab." Next to "WEP," click "Enabled." Select "64 bit" in the drop-down menu beside "WEP Encryption." This will require the customer to use a 10-digit encryption key. Next, select "ASCII" in the "WEP Mode" drop-down menu. This will allow the customer to use all numbers and letters for their WEP or encryption key. Click "Key 1" and enter 10 letters or numbers that can be used as the security key. Finally, click "Apply."
Open a browser and enter 192.168.2.1. Click "Wireless." Select "64 bit WEP" in the "Security Mode" drop-down menu. Enter a 10-digit number in the field beside "Key 1" or enter a passphase in the field beside "Passphase." Click "Apply."
How do I increase internet speed with Vista?
by Answerbag Staff on August 22nd, 2010
| 1 person likes this
Does NetZero Internet work with T-Mobile home phones?
by Answerbag Staff on August 18th, 2010
| 1 person likes this
How do I connect to the Internet via a wireless telephone?
by Answerbag Staff on August 20th, 2010
| 1 person likes this
Are you stuck on the internet?
by PL is on vacation right now on May 20th, 2012
| 1 person likes this
Hundreds of thousands of internet users to lose their web service on July. Hoax or fact? See description.
by paulizone on April 21st, 2012
| 5 people like this
You're reading How do I add a password to wireless Internet?
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!
Comments