- NEW!
by automd on February 28th, 2010
here's the way on how to reset the tire pressure. it can be reset in two ways:
1. with the ignition position on, just pull the interior lamps control to on and off settings 3times.
2. it can also be reset using the ff steps
-turn the ignition on and turn the radio off
-press the tune display button on the radio for just 5seconds
-press the seek scan up or down to scroll thru the main menu
-press the tune display button to reset, scroll until exit appears on the display
-press the tune disp button to exit programming. a chime will be heard to verify exit.
by WABOO on February 26th, 2010
the easiest way is to ask your local dealer...or anyone who has that chevy impala. No instructions on the chevy manual?
on a mid 1970's 3000 ford tractor how do you set the timing to remove and replace the fuel injector pump?
by gmathews on April 23rd, 2011
| 1 person likes this
Has anybody had a chevy car that started up and than cut back off? if so what was it and did you get it fix
by Anonymous on April 23rd, 2011
| 1 person likes this
01 grand prix won't start when its hot outside~ if pushed into shade &/or doors & hood left open for 15 min, car will start. Whats going on?
by stewy4 on July 16th, 2011
| 1 person likes this
Where do you find a Speedometer Cable or Speed sensor in a 1988 Acura Integra
by Annie_A9400 on July 16th, 2011
| 1 person likes this
what does a starter look like on a 1998 cadillac deville?
by Cristy_W on July 24th, 2011
| 1 person likes this
You're reading How do I reset the low tire pressure light in the message center of my 2003 Chevy Impala?
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!
Comments