ANSWERS: 1
  • Programming a keyless-entry remote to a car can be easily done with the right instructions. The process for adding a keyless remote to any car with the accessibility for it is very similar in most instances.

    Getting Started

    Find your car's programming instructions on Program Your Remote's website (www.programyourremote.com). Downloading the PDF file will give you step-by-step instructions on programming the car's remote. Once you have downloaded and started the instructions, it should be a very simple process.

    Tips

    In some cases, the remote doesn't seem to be programming to the car. This could be due to several problems, such as a low battery in either the car or the remote itself. A battery can be tested through the dealership. Another potential problem is a faulty or unusable antenna. There are three components to check in the car that may cause the issue: the antenna-to-control unit, the antenna itself or the control unit. The way to test each unit is by connecting a voltage tester to the unit's wiring to make sure that a signal is coming through, to see if any of the units is in need of repair. Any other problems may be traced back to a faulty keyless remote. Dealerships can test these remotes to see if they work; otherwise, try to reinstall a remote and see if it is either a process or a device error.

    Source:

    Dali Racing: Keyless Entry Troubleshooting

Copyright 2023, Wired Ivy, LLC

Answerbag | Terms of Service | Privacy Policy