- NEW!
by humanity74 on January 14th, 2010
I have a Chevrolet HHR and prepare yourself also for replacing wheel bearing assemblies. I've had to do this on both the left and right sides, six months apart. Bon chance.
by ljmcfalls on January 14th, 2010
depends on year but for the most part parts and labor would be in the 250.00 to 300.00 range with new parts or 150 200 with used parts if a soda got spilled on there you can try lifting the cover and cleaning it out there should be a u clip in the lower front of the handel itself pull that out and the cover should come up as long ans the sticky hasnt got in the cables it should work
by ljmcfalls on January 14th, 2010
i needs the shifter handel try pushing down on the whole shifter why shifting
01 grand prix won't start when its hot outside~ if pushed into shade &/or doors & hood left open for 15 min, car will start. Whats going on?
by stewy4 on July 16th, 2011
| 1 person likes this
Has anybody had a chevy car that started up and than cut back off? if so what was it and did you get it fix
by Anonymous on April 23rd, 2011
| 1 person likes this
what does a starter look like on a 1998 cadillac deville?
by Cristy_W on July 24th, 2011
| 1 person likes this
94 bravada, how do I get the rotor off the distibutor? Is it stuck? I looked for any screws, found none
by Lori.A.Archibald.Hailstones on April 8th, 2011
| 1 person likes this
on a mid 1970's 3000 ford tractor how do you set the timing to remove and replace the fuel injector pump?
by gmathews on April 23rd, 2011
| 1 person likes this
You're reading My Mother has CHEVY HHR. And her shifter is messed up. It either wont go in gear or the shifter button gets stuck. what is wrong?
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!
Comments