The Dremel tool is a handheld power tool that is versatile and useful for small at home repairs and projects. The Dremel is known for its rotary drill, but also has the options of many different bits and attachments. Dremels can be corded or cordless and can function as a drill, saw, router, sharpener, carver, etcher, engraver, sander and buffer.

Bit Installation

Installing different bits in the Dremel is the first thing to learn. With the amount of options you have with the Dremel, you may be changing attachments and bits frequently. Before you install anything, make sure the rubber collar is screwed onto the Dremel. Install the collet into the hollow end of the shaft. Hold down on the shaft lock button. This button is located around the neck of the Dremel. Insert the bit or attachment while you are holding the shaft lock button. Tighten the collet with a tightening wrench. Now, the Dremel is now ready to use.

Tool Handling

The Dremel should usually be held like a pen or pencil. There are indentations on the top of the tool to mark places to grip the Dremel. The tool should be comfortable in your hand. Practicing with the tool before working on your project is recommended, so that you become familiar with the speeds, handling and functions of the Dremel.

Precautions

When working with a Dremel tool, you should always exercise proper safety. When changing the bits, make sure the Dremel is unplugged or set to "Off." When using the Dremel, never press down hard on the tool, as you can damage the bit or attachment. Pushing down will not make the tool work faster. Some attachments, such as a router bit, may need to make a few passes to achieve your desired result. Always wear safety glasses when working with your Dremel and when you are done using the tool, always dust debris off it.

Source:

Dremel: Attachments and Accessories