ANSWERS: 1
  • Installing a security light requires an approved cable to carry electricity from an existing electrical source inside the house to the security light mounted outside.

    Before You Begin

    Determine where you want to install the light and get an electrical cable through an inside wall at that site.

    Things You Will Need

    Security light fixture Bulbs 14 gauge 2 conductor wire with ground (usually designated 14/2 w ground) Wire staples Wire cutter and stripper Screwdriver Drill and 1/2 inch bit (wood or masonry depending upon the composition of the wall) Wire nuts to connect the power cable at a source Mounting screws Plastic screw anchors Ladder Electric box and switch if you want to control power to the light

    What You May Not Need

    Security light fixtures often come with bulbs, wire nuts, mounting screws and anchors in one package to facilitate installation.

    Don't Forget

    You'll have to turn off power to the circuit you'll be working on.

    Handyman Advice

    If you want to place your light outside of a finished wall, run conduit or outdoor-rated cable from where you have easy access to power--such as the attic.

    Source:

    The Black & Decker Complete Guide to Home Wiring

Copyright 2023, Wired Ivy, LLC

Answerbag | Terms of Service | Privacy Policy