- NEW!
Help answer this question below.
I have a really old (1988) Magnavox TV, model CH3930 BL. This set requires you to tune each channel and select a channel number to display, before you can use the UP and DOWN channel selector buttons on the user panel. Does anyone have a user guide?
by answerbagfan on July 2nd, 2009
| 1 person likes this
Magnavox MS3450C321 "buzzes" when graphics come on screen. All others in home OK. ON Sat, Dish net. Have adjusted all audios no help.
by Anonymous on October 3rd, 2009
| 1 person likes this
I have 61" Phillips Magnavox rear projection, about 10yrs old. The picture bounces in and out. It goes in real small, or completely gone, then it bounces out, continuously... any ideas?
by Anonymous on August 29th, 2009
| 1 person likes this
I have a 2001 55 inch Magnavox model number 55p8288. The TV has an orange tint to it, it looks like a black and white tv but instead of white it is orange. Any suggestions on what the problem might be and how to fix it would be great.
by Dodge506 on July 14th, 2009
| 1 person likes this
I have a really old (1988) Magnavox TV, model CH3930 BL. This set requires you to tune each channel and select a channel number to display, before you can use the UP and DOWN channel selector buttons on the user panel. Does anyone ha
by answerbagfan on July 2nd, 2009
| 1 person likes this
You're reading I have a Magnavox MSD724G, TV/DVD Player Combo, and the TV comes on and off by itself. Also when the TV gives time I try to move the channels up/down, and volume up/down and nothing. I remove the bateries believing that the problem could be the caused by