- NEW!
by qwerty on November 11th, 2009
Every 4x4 from the big three I have ever seen will only go into 4wd low when in neutral and at a dead stop
you may have been able to shift into 4wd even though you pushed the low switch when moving, but I odubt it was low gear
a flashing light on any transmission/transaxle is a trouble code and needs to be scanned to find out what is wrong
by level headed on November 11th, 2009
The blinking means it's not engaged (4X4).
I have a 1998 gmc jimmy and it has 3 montior that will not set. 1. catalyst mon. 2. evap and 3. EGR
Can anybody help!
by blazer2001 on March 18th, 2011
| 1 person likes this
how can i reset error codes in display message senter, on a chevrolet tahoe 2001 mod.
by jknondal on February 25th, 2011
| 1 person likes this
The brake lights on my 1994 Chevy 3500 stay on, how do I change the brake pedal switch?
by hiddenjewelfarm on May 17th, 2011
| 1 person likes this
where can i get a good picture of 1998 350 engine
by frstallion on March 14th, 2011
| 1 person likes this
where can i get a good picture for a 1998 350 engine
by frstallion on March 14th, 2011
| 1 person likes this
You're reading I have a 98 blazer that only goes into 4-wheel low in neutral gear. It never used to do this. If i push the button for 4-wheel low in gear it only blinks. Anyone know why.
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!
Comments