by fink dog on February 22nd, 2005

fink dog

Question

Help answer this question below.

I'd like to resurface my laminate kitchen counter. Is it possible to glue the new formica top to the existing surface without removing the old formica?

  • Like
  • Report

Answers. 2 helpful answers below.

  • by Jack Scotty on February 22nd, 2005

    Jack Scotty

    Yes, however its important that you prep the surface.

    Use #400 fine sandpaper to sand down the old surface. Go over the surface with tack cloth to remove the dust and then follow up with a cleaning treatment using acetone. Once the surface is clean and dry you are ready to apply the cement. It comes with instructions, however its pretty simple to use. Just apply it evenly to both surfaces and allow it to dry. It may take an hour or more for it to fully dry. It must be dry to the touch on both surfaces. Otherwise it will not stick very well. Make sure you have it positioned correctly because you only get one shot at sticking it to the old surface. Once its stuck, ITS STUCK. One thing that I did to avoid this problem was to cut the piece of laminate to be bigger than the surface so once I got it into position I could use a router to trim the edge down nice and neat.

    You have probably thought this through, but I will say this for the benefit of those who are reading along with you- Formica only glues down to flat surfaces. It will not bend or conform to curved surfaces or to countertops with the built in backsplash.

    • Like
    • Report

    1 comment | Post one | Permalink

  • by Galeanda on June 2nd, 2007

    Galeanda

    Remember though that if your bottom Formica layer ever lifts, it will lift both layers and then you will have to start from scratch.

    No comments. Post one | Permalink

Want to attach an image to your answer? Click here.

Did this answer your question? If not, then ask a new question or create a poll.

More Questions. Additional questions in this category.

You're reading I'd like to resurface my laminate kitchen counter. Is it possible to glue the new formica top to the existing surface without removing the old formica?

Follow us on Facebook!

Related Ads

ANSWERBAG BUZZ

I like it on the kitchen counter facebook
Resurface formica
Resurface laminate
How to resurface formica
Removing builtin backsplash from laminate counter