- NEW!
by Angel Kisses on July 9th, 2009
I didn't use the ruler but one night I was drunk with a friend and we started measuring toes...lol.
by j ninja... on July 6th, 2009
A 4x4
by Brian on July 6th, 2009
Isn't that getting a little personal? :-D.
by Spicy Hot on September 15th, 2009
My bedroom.
by Gone on July 7th, 2009
A beer bottle.
by Meow on July 6th, 2009
I used a flex-ruler, so I hope this counts. I have to explain...my aunt told me that the length from where the nose starts (directly in the center or exactly between the eyes) to under the chin is the exact same length as from the tip of your pinky finger to the start of your wrist.
`
I realized that I didn't really need a ruler at all to do this; you can measure it using your thumb and index fingers. Form a C shape with them and place the index finger over the start of your nose and the thumb under your chin. You mouth should rest comfortably in the space that your fingers have formed. Then hold it like that and place it over the top of your pinky, placing your thumb on the start of the wrist. It will be the exact same.
`
Notice though, if you turn your hand over so the thumb is on the top instead, it WILL NOT be the same.
~
Sorry for such a long answer, but I had to explain...LOL!!!
by Mr. Trizzae on July 6th, 2009
5kv splices
by - M.C.S. - Dave on July 6th, 2009
A window I had to replace.
by Possum on July 6th, 2009
I'm not going to say on the family section of AB but I washed the ruler afterwards ;-P
by Bookworm on July 6th, 2009
My kitchen drawers and cabinet fronts, I put hardware on them.
Side fact: my kitchen doesn't have any straight lines, never noticed until today.
by pedal junky on July 6th, 2009
some bicycle parts then had translate the measurement from imperial to metric.i really need to get a MM tape
by Esteban-- Smartest Pumpkin on July 6th, 2009
a 38 mm knee joint sizer
by AmberMason on February 4th, 2010
I measured the height of my friend with ruler as my measuring tape was missing that day.
by Pecks bad boy on July 8th, 2009
damn... you think that is the only thing a guy ever measures with a ruler, but it was the last thing I measured. LOL
by buttman on July 8th, 2009
You don't want to know.
by R U Sirius on July 7th, 2009
Sorry.........I can't use a ruler for that.........<pulls out yard stick>
by Galeanda on July 7th, 2009
Hard one....if it was a measuring tape, I'd say a blouse pattern I was using yesterday. I may have used a small seam gauge ruler to measure the seam width at the sewing machine.
by Scooby on July 7th, 2009
My garden border! :-/
by happy friday on July 7th, 2009
well.................
by Holmeboy on July 7th, 2009
I can send you a pic if you like!
by anonymous on July 7th, 2009
i really can't remember...
by bagicide stayed 10 months too long on July 7th, 2009
Seam allowances and hems. I couldn't find my seam gauge the other day.
by Holmeboy on July 7th, 2009
Well - it's a bit predictable i guess, but me being a man it was my penis! lol
by -NUNYA-- on July 6th, 2009
Measured out a square of Poster Board. +5
by Possum on July 6th, 2009
Did both today but I don't remember the order. It was either printing placement or my cat.
by Phantom Answers on July 8th, 2009
The keychain I'm making for you.:)
by zeb11111 on November 7th, 2009
Hahaha...
by Merfish on July 16th, 2009
Squares on a paper. (making a price sheet chart).
by Marguerite on November 7th, 2009
I was working on a drawing that I had to use a protractor to draw a semicircle and a ruler to draw straight lines.
by Stranger in a Strange Land on November 19th, 2009
A small photograph to determine the size of frame to buy. +4
by philosopher-saint on November 7th, 2009
A basketball.
[It didn't work?]
;-)
Can a hack saw cut concrete?
by Answerbag Staff on June 25th, 2010
| 1 person likes this
What is a screw pitch gauge used for?
by Answerbag Staff on April 19th, 2010
| 1 person likes this
Are bubble&double flaring tools the same?
by Answerbag Staff on May 16th, 2010
| 1 person likes this
How can I saw a piece of plastic in half (make a flat back) on something as small as a skipping stone with a handtool?
by Nightkeeper on September 29th, 2010
| 1 person likes this
Have you ever actually taken advantage of the Craftsmen hand tool warranty?
by mrtoolman on September 11th, 2010
| 4 people like this
You're reading What's the last thing you measured with a ruler?
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!
Comments
I have very long toes Yo:):)LOL:P I am not kidding:)
by TjoeBaxter is Hot Yo on July 9th, 2009
yea rigth, Toes. ROFL
by DukeG on July 10th, 2009