- NEW!
by qwerty on May 21st, 2009
it has to be pried, there is a tool for this, you have to be careful as the clips are set in hard cardboard or weak plastic if you pull wrong the clip stays in the door and comes out of the panel
by bagicide stayed 10 months too long on May 21st, 2009
Like Qwerty said, there are little plastic or metal clips that hold the liner into the metal frame. If you pull back gently on the liner, you'll be able to tell where the clips are by the areas that stay against the door. You'll want to pry away at those points very gently to get it off.
http://www.expertvillage.com/video/22160_car-engine-wire-window.htm
Is the 1994 buick century front or rear wheel drive?
by Answerbag Staff on April 30th, 2010
| 1 person likes this
What is the recommended mileage for an oil change for a 2000 buick century?
by Answerbag Staff on April 4th, 2010
| 1 person likes this
my 2000 buick century keeps blowing the 10 amp air conditioning fuse. the clutch kicks in and shortly after it blows. any ideas?
by teemee69 on July 18th, 2010
| 1 person likes this
Where are the oxygen sensors in a 1993 Buick Century?
by Answerbag Staff on March 5th, 2010
| 1 person likes this
where is the pcm on a 1995 buick century ?
by Austin691969 on January 14th, 2012
| 1 person likes this
You're reading After taking out the screws, how do you remove the inside door panel to get to a fallen power window/ regulator on a 2001 buick century?
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!
Comments