- NEW!
by jaygee on November 9th, 2009
You need to find out if there are any fault codes stored. Do not shotgun your truck by changing parts untill you know what is wrong. Is there fuel when the truck stalls, what is your fuel pressure like, is there spark when it stalls.....It may end up being cheaper to have a pro look at your truck rather then just replacing parts till its fixed.
by G. WASH. on May 11th, 2009
It could be MANY things. 1st: scan the computer. (Throttle Position Sensor would be highly suspect; also: IAC motor/valve; EGR valve;, etc.).
My 96' Ford Ranger, 4.0 is idling badly. Smells like gas as well. Changed one of the o2 sensors, coolant temp sensor as well.
by astamp87 on March 9th, 2011
| 1 person likes this
how can i reset error codes in display message senter, on a chevrolet tahoe 2001 mod.
by jknondal on February 25th, 2011
| 1 person likes this
what engines will fit in a 1988 isuzu trooper 4x4. it has a 2.6 liter engine in it
by Eric_O on February 3rd, 2011
| 1 person likes this
where can i get a good picture for a 1998 350 engine
by frstallion on March 14th, 2011
| 1 person likes this
2001 ford exploer limited door ajar light go on and off any thou doors are closed
by Kenner15 on April 25th, 2011
| 1 person likes this
You're reading My 2001 Chev Blazer up but when i stop it dies, it fires right back up and drives fine as long as i can give it gas but once i slow down to turn or stop the car dies again. I've replaced the Fuel pump this has not fixed the problem. Any S
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!
Comments