Ask a Question
or
Create a Poll
  1. Home /
  2. Questions /
  3. Autos & Motorcycles
  4. / Car Makes & Models
  5. / Makes A - H
  6. / Dodge Models
  7. / Ram

by ngraven on May 4th, 2009

ngraven

Question

Help answer this question below.

1995 Dodge Ram 3500 Van: horn doesn't function. Emits a click from behind the passenger dash when the horn is pressed. Any suggestions on how to solve or where to get schematics so I can track the problem?

  • Like
  • Report
Share:
Other

Answers. 2 helpful answers below.

  • by G. WASH. on May 4th, 2009

    G. WASH.

    It sounds like a faulty 'horn relay' (at the 'click').

    • Like
    • Report

    No comments. Post one | Permalink

  • by autoexpert on May 15th, 2009

    autoexpert

    Horn Will Not Sound (1995 Dodge Ram Van)

    1.Check for burned horn fuse. If fuse is okay, go to step 2). If fuse is burned, replace it and ensure horn is functioning. If horn sounds and new fuse does not blow, repair is completed. If horn fails to sound and new fuse does not blow, go to step 2). If horn fails to sound and new fuse blows, check for shorted wiring between fuse terminal and horn, and check for short circuit in horn.

    2.If fuse is okay in step 1), unplug wire connector at horn. Using a test light, connect one lead to wire connector and other lead to ground. Depress horn switch. If test light glows, horn is ungrounded or faulty, go to next step. If test light does not glow, go to step 4).

    3.Connect jumper wire from horn bracket to known good ground. Reconnect horn connector. If horn fails to sound with jumper wire and horn connector connected, replace horn.

    4.If test light fails to glow in step 2), check for defective horn relay by substituting a known good relay. If test light glows when horn switch is depressed, original relay is defective. If test light fails to glow with substitute relay, go to next step.

    5.Disconnect relay. Connect jumper wire between battery terminal and horn terminal on relay terminal board. See Fig. 1 . If test light fails to glow, check for open circuit between horn fuse and horn terminal on relay terminal board. Also check for open circuit between relay terminal board and horn terminals. If test light glows, fault exists in horn switch or open circuit in wiring between relay terminal and horn switch.


    Complete repair article including figures are available - please see my profile for details.

    No comments. Post one | Permalink

Want to attach an image to your answer? Click here.

Did this answer your question? If not, then ask a new question or create a poll.

More Questions. Additional questions in this category.

You're reading 1995 Dodge Ram 3500 Van: horn doesn't function. Emits a click from behind the passenger dash when the horn is pressed. Any suggestions on how to solve or where to get schematics so I can track the problem?

Follow us on Facebook!

Related Ads

Related Questions

Professionally Researched

ANSWERBAG BUZZ

1995 dodge ram horn
How to fix horn on my dodge van
Dodge 1995 van obd port
Dodge ram 3500 van
2002 3500 dodge van can t shift out of park

Answerbag

a Demand Media company