ANSWERS: 1
  • REMOVE OR DISCONNECT Negative battery cable. Raise vehicle. Remove Fuel tank. Pump and sending unit assembly by turning cam lock counterclockwise using tool J-36608 or J-24187 or equivalent. Alt method: Use hammer and blunt type punch and carefully knock ring loose. Pull fuel pump up into attaching hose while pulling outward from the bottom support. Do not damage rubber insulator or strainer. INSPECT Inspect fuel pump attaching hose for signs of deterioration. Inspect rubber sound insulation at bottom of pump for deterioration. INSTALL OR CONNECT Pump assembly into attaching hose. NOTE Care should be taken not to fold over or twist strainer when installing sending unit as this will restrict fuel flow. Sending unit and fuel pump assembly into fuel tank. (Always use a new O-ring seal). Cam lock assembly. Turn cam lock clockwise to lock it. Fuel tank assembly. Negative battery cable. START vehicle and check for fuel leaks. Lower vehicle. NOTE: It is a good idea to replace the fuel filter as well.

Copyright 2023, Wired Ivy, LLC

Answerbag | Terms of Service | Privacy Policy