- NEW!
by NoMorph on January 27th, 2009
The autoprogram channel feature must have been run while it was connected to a digital receiver of some sort. In other words, only 3 was available at the time. You may need a remote to do this, but if you hit MENU and run Auto Program channels again, making sure your cable is connected directly to the VCR so that it can see all channels, it will program every channel it can pick up. Alternatively, using a remote, you should be able to punch in the number of the channel to make it go to that channel. good luck.
Would a blank S-VHS tape be able to be used in an older VCR for recording and/or playback?
by camarrow84 on October 18th, 2010
| 1 person likes this
While recording, the electricity went out. Now, the vcr records snow. TV is fine. Checked connections, all is fine? What else do I check?
by Anij on October 30th, 2010
| 1 person likes this
I have a Samsung VCR which plays tapes properly except for 1 tape. It shows up with a blue screen
by cvanderhoef on November 2nd, 2011
| 1 person likes this
Does anyone use a vcr? what format?
by bradleyt98 on January 2nd, 2011
| 1 person likes this
Does anybody still have a VCR and use it? Is it still working?
by Sammy on January 7th, 2011
| 4 people like this
You're reading I have an older model JVC VHS machine. When trying to record a program the only channel options I have are 3 and F-1. How can I get it back to choose all/any channel I want to record?
Your favorite Q&A site is on Facebook! Become a fan to connect with the ever-growing community of Answerbaggers, share your thoughts and find out what Answerbag's up to next!
Comments